Skip to content

Bottleneck Map
Company Database
Company Signals
Watchlist
Alerts
Addithive Pro
Research Hub
Tools
About

Category: Company Intelligence

Company-focused additive manufacturing exposure, earnings, strategy, capacity, qualification and investor research.

Avient AM Review: Specialty Polymer Know-How Remains the Exposure, Not a New 2026 Catalyst
Addithive Company Review · October 3, 2026

What changed

Avient continues to use 3D printing for prototyping, tooling and development of higher-performance polymer formulations, but current 2026 public disclosure does not point to a material new AM-specific commercial catalyst.

Addithive read-through

The AM exposure is evaluated on whether it affects qualification, inspection, workflow integration, accepted-part economics or recurring production. A review with no new catalyst is deliberately labeled that way rather than being promoted as a false signal.

What to watch next
- Production-scale customer use and repeat orders.
- Workflow or material qualification milestones.
- Recurring software, consumables or service economics where relevant.
- Any disclosure that makes AM contribution financially material.
Primary sources
- Avient 3D printing and rapid prototyping
- Avient investor center / Q2 2026
Research mapping only. This is not investment advice.
Share this:
LinkedIn
X
Facebook
Reddit
Like this:
Like Loading…
October 3, 2026
Dentsply Sirona AM Review: Primeprint Remains an Integrated Dental Workflow, Not a Standalone Printer
Addithive Company Review · October 3, 2026

What changed

Primeprint remains a tightly integrated dental 3D-printing system spanning printing, post-processing, material tracking and validated workflows. Q2 2026 results show broader business stabilization, but no discrete AM-specific growth disclosure.

Addithive read-through

The AM exposure is evaluated on whether it affects qualification, inspection, workflow integration, accepted-part economics or recurring production. A review with no new catalyst is deliberately labeled that way rather than being promoted as a false signal.

What to watch next
- Production-scale customer use and repeat orders.
- Workflow or material qualification milestones.
- Recurring software, consumables or service economics where relevant.
- Any disclosure that makes AM contribution financially material.
Primary sources
- Dentsply Sirona Primeprint
- Dentsply Sirona Q2 2026 results
Research mapping only. This is not investment advice.
Share this:
LinkedIn
X
Facebook
Reddit
Like this:
Like Loading…
October 3, 2026
PTC AM Review: Digital Implant Center Shows Creo Inside a Closed Clinical AM Workflow
Addithive Company Review · October 3, 2026

What changed

PTC, EOS and Rambam announced a July 2026 digital implant engineering center designed to integrate CAD, validation, metal printing and quality for patient-specific implants—one of the cleaner examples of Creo embedded in a controlled AM production workflow.

Addithive read-through

The AM exposure is evaluated on whether it affects qualification, inspection, workflow integration, accepted-part economics or recurring production. A review with no new catalyst is deliberately labeled that way rather than being promoted as a false signal.

What to watch next
- Production-scale customer use and repeat orders.
- Workflow or material qualification milestones.
- Recurring software, consumables or service economics where relevant.
- Any disclosure that makes AM contribution financially material.
Primary sources
- PTC / EOS / Rambam implant center
- PTC Creo additive manufacturing
Research mapping only. This is not investment advice.
Share this:
LinkedIn
X
Facebook
Reddit
Like this:
Like Loading…
October 3, 2026
AMETEK AM Review: FARO Integration Strengthens the Metrology Side of the AM Stack
Addithive Company Review · October 3, 2026

What changed

AMETEK’s ownership of FARO adds portable 3D metrology and digital-reality capabilities alongside Creaform, strengthening its relevance to inspection and dimensional verification even though AM-specific revenue is not separately disclosed.

Addithive read-through

The AM exposure is evaluated on whether it affects qualification, inspection, workflow integration, accepted-part economics or recurring production. A review with no new catalyst is deliberately labeled that way rather than being promoted as a false signal.

What to watch next
- Production-scale customer use and repeat orders.
- Workflow or material qualification milestones.
- Recurring software, consumables or service economics where relevant.
- Any disclosure that makes AM contribution financially material.
Primary sources
- AMETEK acquisition of FARO
- AMETEK 2026 quarterly results hub
Research mapping only. This is not investment advice.
Share this:
LinkedIn
X
Facebook
Reddit
Like this:
Like Loading…
October 3, 2026
Autodesk AM Review: Fusion 2026 Adds More Production-Oriented Additive Controls
Addithive Company Review · October 3, 2026

What changed

Autodesk’s July 2026 Fusion update added sub-nest arrangement and slice-analysis tools for additive workflows, improving build preparation and thermal-risk screening across MPBF, MJF and SLS.

Addithive read-through

The AM exposure is evaluated on whether it affects qualification, inspection, workflow integration, accepted-part economics or recurring production. A review with no new catalyst is deliberately labeled that way rather than being promoted as a false signal.

What to watch next
- Production-scale customer use and repeat orders.
- Workflow or material qualification milestones.
- Recurring software, consumables or service economics where relevant.
- Any disclosure that makes AM contribution financially material.
Primary sources
- Autodesk Fusion July 2026 update
- Autodesk Q2 FY2027 results
Research mapping only. This is not investment advice.
Share this:
LinkedIn
X
Facebook
Reddit
Like this:
Like Loading…
October 3, 2026
Henkel AM Review: LOCTITE 3D Materials Remain Active, but 2026 Disclosure Is Thin
Addithive Company Review · October 3, 2026

What changed

Henkel continues to support medical and industrial photopolymer applications through LOCTITE 3D materials, but no material 2026 AM-specific commercial catalyst is evident in current public disclosure.

Addithive read-through

The AM exposure is evaluated on whether it affects qualification, inspection, workflow integration, accepted-part economics or recurring production. A review with no new catalyst is deliberately labeled that way rather than being promoted as a false signal.

What to watch next
- Production-scale customer use and repeat orders.
- Workflow or material qualification milestones.
- Recurring software, consumables or service economics where relevant.
- Any disclosure that makes AM contribution financially material.
Primary sources
- Henkel LOCTITE 3D Formnext materials update
Research mapping only. This is not investment advice.
Share this:
LinkedIn
X
Facebook
Reddit
Like this:
Like Loading…
October 3, 2026
Materion AM Review: Materials Capability Is Real, but No New 2026 AM Catalyst Is Disclosed
Addithive Company Review · October 3, 2026

What changed

Materion maintains an unusually broad AM laboratory covering feedstock design, LPBF, binder jetting, HIP and materials characterization. Record Q2 2026 results did not identify a material new AM-specific commercial catalyst.

Addithive read-through

The review separates demonstrated AM capability from financial materiality. Where a company has a concrete 2026 manufacturing or technology change, that is highlighted; where it does not, the absence of a new AM catalyst is recorded explicitly.

What to watch next
- Qualified customer adoption and repeat production.
- Capacity utilization and accepted-part throughput.
- New material/process approvals.
- Any disclosure that makes AM exposure financially measurable.
Primary sources
- Materion additive manufacturing lab
- Materion Q2 2026 results
Research mapping only. This is not investment advice.
Share this:
LinkedIn
X
Facebook
Reddit
Like this:
Like Loading…
October 3, 2026
Jabil AM Review: The Company Is Scaling Manufacturing, but AM Remains a Supporting Capability
Addithive Company Review · October 3, 2026

What changed

Jabil finished fiscal 2026 with $36.0 billion of revenue and major capacity expansion, while additive manufacturing remains part of its broader engineering and low-volume manufacturing toolkit rather than a separately disclosed growth engine.

Addithive read-through

The review separates demonstrated AM capability from financial materiality. Where a company has a concrete 2026 manufacturing or technology change, that is highlighted; where it does not, the absence of a new AM catalyst is recorded explicitly.

What to watch next
- Qualified customer adoption and repeat production.
- Capacity utilization and accepted-part throughput.
- New material/process approvals.
- Any disclosure that makes AM exposure financially measurable.
Primary sources
- Jabil FY2026 results
- Jabil additive manufacturing fact sheet
Research mapping only. This is not investment advice.
Share this:
LinkedIn
X
Facebook
Reddit
Like this:
Like Loading…
October 3, 2026
Sandvik AM Review: Divestment Sharpens the Powder-Only Thesis
Addithive Company Review · October 3, 2026

What changed

Sandvik agreed to divest its Additive Manufacturing business in May 2026 after already discontinuing component-manufacturing services, while its powder platform continues to launch AM alloys such as Osprey GRCop-42 for space applications.

Addithive read-through

The review separates demonstrated AM capability from financial materiality. Where a company has a concrete 2026 manufacturing or technology change, that is highlighted; where it does not, the absence of a new AM catalyst is recorded explicitly.

What to watch next
- Qualified customer adoption and repeat production.
- Capacity utilization and accepted-part throughput.
- New material/process approvals.
- Any disclosure that makes AM exposure financially measurable.
Primary sources
- Sandvik AM divestment
- Sandvik metal-powder news
Research mapping only. This is not investment advice.
Share this:
LinkedIn
X
Facebook
Reddit
Like this:
Like Loading…
October 3, 2026
BICO Group Review: Profitability Improves While Bioprinting Remains a Platform Capability
Addithive Company Review · October 3, 2026

What changed

BICO reported Q2 2026 organic growth of 7.3% and a 59.3% gross margin while continuing to operate CELLINK bioprinting and 3D cell-culture platforms. The key signal is operating recovery, not a discrete bioprinting breakout.

Addithive read-through

The review separates demonstrated AM capability from financial materiality. Where a company has a concrete 2026 manufacturing or technology change, that is highlighted; where it does not, the absence of a new AM catalyst is recorded explicitly.

What to watch next
- Qualified customer adoption and repeat production.
- Capacity utilization and accepted-part throughput.
- New material/process approvals.
- Any disclosure that makes AM exposure financially measurable.
Primary sources
- BICO Q2 2026 report
- BICO 3D cell culture and bioprinting
Research mapping only. This is not investment advice.
Share this:
LinkedIn
X
Facebook
Reddit
Like this:
Like Loading…
October 3, 2026

1 2 3 … 7

Search

Addithive

Engineering-led research on additive manufacturing processes, industrialization, qualification, tools and company exposure.

Bottleneck Map
Company Database
Company Signals
Watchlist
Alerts
Addithive Pro
Research Hub
Tools
About

FAQs · Latest research

Research mapping only. Not engineering certification or investment advice.

© Addithive

Loading Comments...

Write a Comment...

Email (Required)

Name (Required)

Website

%d